- Diameter: 3/8″ ( 1 cm )
- length of sensor: 2.5 cm
- length of magnet: 2.5 cm with 18″ Long Wire Leads
- Easy & Quick installation
- Longer Length Operate Gap Ÿ” (19mm) min.
Reed Switch Specifications:
Contact Rating : 10W/VA
*** Switching Voltage (Max.) : 200 VDC
*** Switching Current (Max.) : 0.5 Amp.
Contact Resistance (Min.) : 150 milli ohms
Life Expectancy : 10x 10 6 Operations
Insulation Resistance : 10 9 ohms
Shock Resistance : 30G for 11mSec.
Vibration Resistance : 20G ( 10 to 1000Hz)
Magnets : ALINCO/ Rare Earth (Unless otherwise specified)
Plastic Material : ABS Plastic (Unless otherwise specified)
- The sensor alone can be connected only in low power (less than 12 W) dc circuits. it can not directly connect to 230 v ac circuit. For that you will have to buy our relay fixed sensor version for 230v ac.
* plz study the above points carefully before ordering this item.
Returns will NOT be approved if you state that the item is not suitable for
your purpose or not as expected etc.
Returns will NOT be approved if you state that the item is not suitable for
your purpose or not as expected etc.
Reviews
There are no reviews yet.